Description
Brand new delay pedal from Death By Audio!
Free Shipping to Continental U.S.
Collar City Guitars is an Authorized Death By Audio Dealer and a Preferred Reverb Seller, buy with confidence!
----------------------------
An amp, a speaker, and a microphone inside a pedal.
Amp Crash packs the sound and feel of a cranked amp into a compact stompbox. With a built-in 3-watt amplifier, internal 2" speaker, and microphone, it captures the interaction of a real speaker moving air, then lets you blend the direct amp signal with the mic'd sound for everything from rich overdrive to crushing fuzz, blooming harmonics, natural feedback, and completely unpredictable textures.
The sound isn't being simulated. It's happening.
Unlike traditional distortion or amp simulation pedals, Amp Crash creates sound physically, not just electronically. A real amplifier drives a real speaker. A real microphone captures what that speaker is actually doing. As those elements interact, they generate harmonics, feedback, compression, and textures that only exist because air is moving inside the pedal.
The result is an instrument that breathes, responds, and sometimes even fights back, just like your favorite cranked amp.
Perfect for recording, practicing, experimenting, or discovering sounds you simply can't get from a conventional pedalboard.
-------------------------------------------------------
CONTROLS:
-
Amplifier and Routing
- POWER [Footswitch]: Buffered bypass. Engages or bypasses the pedal and turns the internal speaker on or off.
- DI OUT: Controls the level of the direct amplifier signal sent to the OUTPUT.
- MIC OUT: Controls the level of the internal microphone signal sent to the OUTPUT.
- MIC GATE: Flip up to enable a noise gate for the internal microphone.
Note: The gate is triggered by the instrument INPUT. - GAIN: Controls the gain of the internal amplifier. Turn it to OVERLOAD for gnarly distortion and wild oscillation.
- TONE: Shapes the amplifier EQ from deep, bass-heavy sounds to bright, focused tones.
-
SFX
- REVERB: Digital reverb ranging from a small room to a massive cave.
- ECHO: Classic tape-style echo.
- CHORUS: Rich three-dimensional modulation that spans from metallic flanging to lush chorus.
- DEPTH: Turned fully down, the SFX are bypassed. Controls REVERB blend, ECHO blend and feedback, or CHORUS depth.
- TIME: Controls either REVERB decay, ECHO delay time, or CHORUS speed.
Specs:
- Power Supply: Standard 9 VDC power supply with a 2.1mm negative center barrel. We recommend Death By Audio’s RAW POWER power supply for optimal performance.
- Current Draw: 300 mA
- Internal Amplifier: 3W
- Note: Due to its high current draw, it may be necessary to operate the Amp Crash with a dedicated power supply.
- Dimensions: 5.9" x 3.76" x 2.85" (including hardware)
- Weight: 23.1 oz
- Internal Speaker: 2"